A fusion
splice is a way of joining two fiber cores by melting the ends together using
an electric arc. A splicing machine is used because an extremely high degree of
accuracy is needed; the machine first has to align the cores and then apply the
exact amount of heat to melt the ends before pressing them together.Splicing
can be carried out using a mechanical splice but these only hold the fiber ends
together, precisely aligned but not permanently joined.
There are
several reasons for splicing a fiber cable; these include To join two fibers
due to a breakage. To connect some of the cores straight through a patch
cabinet. To extend a cable run. To reduce losses, a fusion splice has much
lower losses than two connectorized cables joined through a coupler. Or to
attach a pre-terminated pigtail.
FEATURES:-
- Color LCD monitor & 200 magnification
- Compact & Light weight
- Reversible monitor with control panel on each side
- Max. wind velocity of 15m/s.
- 8 Sec. splice time, 40 Sec. tube-heat time
- Simultaneous X and Y views
- Large capacity internal battery
- SYSTEM TEST ensures the best working condition
- User Programmable
- Auto Check Fiber end face
- Store 8000 groups of splice results
- Multiple language options
- Core alignment
MX has wide range of FIBRE OPTIC TESTER ,
you can take a glance at variety of products
http://www.mdrelectronics.com/quicklinks.asp?SAppID=86
If you like us , You can follow us on
facebook http://www.facebook.com/mxelectronics
You can also follow us on Youtube
No comments:
Post a Comment